STAGE 2

Removes up to 85% of scratching, swirling, scuffs, holograms and marring on the paintwork.

BREAKDOWN

STAGE 2 PAINT CORRECTION

Wheel Faces, Barrels & Arches

Firstly, the vehicle is pressure rinsed to take off any loose dirt. The wheel faces, barrels and arches are then allowed to soak in our powerful, yet safe, de-greasing agent for several minutes. These areas are then gently agitated with several types of our soft-bristle brushes to rid the area of brake dust, fallout and other road grime, before being pressure rinsed off with fresh water.

Intense Pre-Wash

The vehicle is then smothered in a rich blanket of foam that clings to paintwork to gently loosen dirt and heavy soiling prior to shampooing. By leaving this on for several minutes, it will allow the snow-foam to work its magic in pulling off the dirt and grime. Once again, the vehicle is pressure rinsed with fresh water to rid the car of any potential contaminants that may still remain. This will reduce the risk of scratches and blemishes to the paintwork and means the vehicle is ready for the next stage.

Hand Shampoo Wash & Dry

The exterior of the car is then shampoo'd by hand. Our high-quality shampoo contains Carnauba Wax, offering superior deep cleaning by removing dirt quickly. The added car wax also helps achieve a showroom shine and protects your car’s paintwork against harmful deposits. Once finished, the car is then rinsed with fresh water before being hand-dried using our ultra-soft microfibre towels. Hand drying means that the water droplets don't have time to sit and dry onto the vehicle, leaving behind patches that are very hard to remove.

External Windows & Mirrors

The external windows and mirrors are sprayed with our crystal-clear glass spray, before being carefully wiped down with our microfibre towels. Our glass cleaner contains anti-mist protection for a clearer vision and improved driving visibility.

Tyre Shine

All tyres are dried and dressed with our tyre-shine product which can last for up to 2 weeks in good weather conditions. Dressing these tyres helps to nourish, moisturise, and restore dried-out and faded trim and tyres to perfect deep high-gloss or satin shine. It also leaves behind a sleek showroom finish.

Full Exterior Clay Bar

Automotive clay will be gently moved across the surface of a vehicle and ‘lifts’ any foreign bodies that protrude from it due to the tacky surface of the clay. These small particles of contamination will then be suspended within the clay bar itself and not deposited back on the surface. When used in the correct manner a clay bar is 100% safe and will not cause any damage to the surface of which it is being used on.

Contrast to popular belief a clay car is also non abrasive and will not remove any level of paintwork from the surface. A clay bar will however highly compromise or even remove most, if not all protection applied to the surface in the way of sealants or waxes simply because of the contact and natural abrasion caused from this or any other contact.

1st Stage Full Exterior Machine Compound

After the exterior has been adequately prepped with the clay bar process, the exterior is then thoroughly rinsed and dried.

The vehicle exterior is slowly machine compounded. Machine compounding allows the paint defects to be removed, whilst polishing the surface delicately and removing the paint scratching, swirls or marring. The technology works by removing a vehicle's clear coat, thereby eliminating all the swirls and scratches from the body of your car.

2nd Stage Full Exterior Machine Polish

After the vehicle is machine compounded, the exterior is now slowly machine polished. Machine polishing also allows the paint defects to be removed, whilst polishing the surface delicately and removing the paint scratching, swirls or marring. The polish helps to finish off the paint surface, leaving a smooth mirror-less finish.

RIGHT FOR YOU? BOOK TODAY!

Book Now